NETCOMM LIMITED THE OFFICIAL X-FILES MODEM 144 (MNP10) Card Type Modem (asynchronous) Chipset Unidentified Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A, 212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis Fax Modulation ITU-T V.17, V.27ter, V.29 Error Correction/Compression MNP5, MNP10, V.42, V.42bis Fax Class Class I & II Data Bus Serial 53446 DIAGNOSTIC LED(S) LED Color Status Condition TM Red On Modem is in test mode TM Red Off Modem is not in test mode TD Red Blinking Modem is transmitting data TD Red Off Modem is not transmitting data RD Red Blinking Modem is receiving data RD Red Off Modem is not receiving data OH Red On Modem is off-hook OH Red Off Modem is on-hook CD Red On Carrier signal detected CD Red Off Carrier signal not detected AA Red On Auto-answer enabled AA Red Off Auto-answer disabled AA Red Blinking Phone is ringing TR Red On DTR signal is high TR Red Off DTR signal is low CP Red On Compression enabled CP Red Off Compression disabled EC Red On Error correction enabled EC Red Off Error correction disabled POWER Red On Power is on POWER Red Off Power is off MISCELLANEOUS TECHNICAL NOTES Diagram not available. SUPPORTED STANDARD COMMANDS Basic AT Commands +++, ‘comma’, A/ A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z &C, &D, &F, &G, &K, &Q, &R, &S, &V, &W, &Y, &Z Extended AT Commands \A, \B, \G, \L, \N, \V %C, %E, %L, %Q Special AT Commands :E, *H, -K, )M, @M, -Q S-Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S18, S24, S25, S29, S30, S32, S33, S38 S48, S82, S86, S95 Note: See MHI help file for complete information. UNIDENTIFIED COMMANDS Command Default \K Unidentified *S Unidentified Proprietary AT Command Set PROTOCOL/SPEED Type: Configuration Format: AT [cmds] Fn [cmds] Description: Selects the protocol and speed the modem will attempt to connect at. Command Function F0 Auto-detect the highest common connect speed. F1 Select V.21 or Bell 103 at 300bps speed. F3 Select V.23 at 75/1200bps speed. F4 Select V.22 or Bell 212A at 1200bps speed. F5 Select V.22bis at 2400bps speed. F6 Select V.32 or V.32bis at 4800bps speed. F7 Select V.32bis at 7200bps speed. F8 Select V.32bis or V.32 at 9600bps speed. F9 Select V.32bis at 12Kbps speed. F10 Select V.32bis at 14.4Kbps speed. See NETCOMM LIMITED THE OFFICIAL X-FILES MODEM 336 (MNP10) for a full command summary.